diff options
author | naddy <naddy@FreeBSD.org> | 2002-11-21 19:56:10 +0000 |
---|---|---|
committer | naddy <naddy@FreeBSD.org> | 2002-11-21 19:56:10 +0000 |
commit | bccd229c57ce1d0af88493b458c72d2569edbf5d (patch) | |
tree | 072e4b98871c15382c79d75f8ef7f481aaccde1a /devel/uisp | |
parent | 29660b59172aa1dbc1f8430c9af3aa74e47487aa (diff) | |
download | FreeBSD-ports-bccd229c57ce1d0af88493b458c72d2569edbf5d.zip FreeBSD-ports-bccd229c57ce1d0af88493b458c72d2569edbf5d.tar.gz |
Update to release 20020626, new maintainer.
PR: 45020
Submitted by: bruno@mail.tinkerbox.org
Diffstat (limited to 'devel/uisp')
-rw-r--r-- | devel/uisp/Makefile | 17 | ||||
-rw-r--r-- | devel/uisp/distinfo | 2 | ||||
-rw-r--r-- | devel/uisp/files/patch-DAPA.C | 308 | ||||
-rw-r--r-- | devel/uisp/files/patch-DAPA.h | 13 | ||||
-rw-r--r-- | devel/uisp/files/patch-Makefile.in | 14 | ||||
-rw-r--r-- | devel/uisp/files/patch-Serial.C | 15 | ||||
-rw-r--r-- | devel/uisp/files/patch-linux_lp.h | 192 | ||||
-rw-r--r-- | devel/uisp/files/patch-linux_serial_reg.h | 148 | ||||
-rw-r--r-- | devel/uisp/pkg-comment | 1 | ||||
-rw-r--r-- | devel/uisp/pkg-descr | 2 | ||||
-rw-r--r-- | devel/uisp/pkg-plist | 1 |
11 files changed, 35 insertions, 678 deletions
diff --git a/devel/uisp/Makefile b/devel/uisp/Makefile index 1ab6e6f..e35686d 100644 --- a/devel/uisp/Makefile +++ b/devel/uisp/Makefile @@ -6,21 +6,12 @@ # PORTNAME= uisp -PORTVERSION= 1.0b -PORTREVISION= 1 +PORTVERSION= 20020626 CATEGORIES= devel -MASTER_SITES= http://medo.fov.uni-mb.si/mapp/uTools/ -EXTRACT_SUFX= .src.tar.gz +MASTER_SITES= http://savannah.nongnu.org/download/uisp/ -MAINTAINER= ports@FreeBSD.org +MAINTAINER= bruno@tinkerbox.org -WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION}/src - -USE_REINPLACE= yes -USE_GMAKE= yes - -post-patch: - @${REINPLACE_CMD} -e "s@-O3@${CFLAGS}@g; \ - s@g\+\+@${CXX}@g" ${WRKSRC}/Makefile +GNU_CONFIGURE= yes .include <bsd.port.mk> diff --git a/devel/uisp/distinfo b/devel/uisp/distinfo index 8f79a09..2c17573 100644 --- a/devel/uisp/distinfo +++ b/devel/uisp/distinfo @@ -1 +1 @@ -MD5 (uisp-1.0b.src.tar.gz) = 3945498181030e6c000f705ac53b920f +MD5 (uisp-20020626.tar.gz) = aeb78302d0127d692c03847a81174eca diff --git a/devel/uisp/files/patch-DAPA.C b/devel/uisp/files/patch-DAPA.C index 79935d9..19c3706 100644 --- a/devel/uisp/files/patch-DAPA.C +++ b/devel/uisp/files/patch-DAPA.C @@ -1,295 +1,13 @@ -diff -urN DAPA.C.orig DAPA.C ---- DAPA.C.orig Tue Aug 29 17:08:28 2000 -+++ DAPA.C Fri Feb 16 20:57:23 2001 -@@ -20,6 +20,7 @@ - - #include <stdio.h> - #include <stdlib.h> -+#if !defined (__FreeBSD__) - #include <linux/serial_reg.h> - - /* sys/io.h is the correct file. If your system doesn't have that -@@ -35,8 +36,20 @@ - #endif - */ - #include "io_uisp.h" -+#endif - - #include <unistd.h> -+ -+#if defined(__FreeBSD__) -+#define __KERNEL__ -+#define LP_STATS -+#include "linux_lp.h" -+#undef __KERNEL__ -+#undef LP_STATS -+#include "linux_serial_reg.h" -+#endif -+ -+#if !defined (__FreeBSD__) - #ifdef DIRTYHACK - #define __KERNEL__ - #endif -@@ -44,6 +57,14 @@ - #ifdef DIRTYHACK - #undef __KERNEL__ - #endif -+#else -+#include <sys/fcntl.h> -+#include <machine/cpufunc.h> -+#include <machine/sysarch.h> -+#define ioperm i386_set_ioperm -+#define _outb(a,b) outb(b,a) -+#endif -+ - #include <signal.h> - #include <sys/time.h> - #include "Global.h" -@@ -133,51 +154,51 @@ - void TDAPA::Reset(){ - switch(pa_type){ - case PAT_DAPA: -- outb(DAPA_SCK, BASE+2); usleep(1000); /* sck = 0, reset = 0 */ -- outb(DAPA_SCK | DAPA_RESET, BASE+2); /* sck = 0, reset = 1 */ -+ _outb(DAPA_SCK, BASE+2); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(DAPA_SCK | DAPA_RESET, BASE+2); /* sck = 0, reset = 1 */ - usleep(1000); -- outb(DAPA_SCK, BASE+2); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(DAPA_SCK, BASE+2); usleep(1000); /* sck = 0, reset = 0 */ - break; - - case PAT_DASA: -- outb(UART_LCR_WLEN8 | UART_LCR_SBC, UART_LCR+BASE); /* select IER and FCR */ -- outb(UART_MCR_DTR | UART_MCR_RTS, UART_MCR+BASE); /* enable port, no int. */ -- outb(0, UART_IER+BASE); /* disable int */ -- outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, UART_FCR+BASE); /* disable fifo */ -+ _outb(UART_LCR_WLEN8 | UART_LCR_SBC, UART_LCR+BASE); /* select IER and FCR */ -+ _outb(UART_MCR_DTR | UART_MCR_RTS, UART_MCR+BASE); /* enable port, no int. */ -+ _outb(0, UART_IER+BASE); /* disable int */ -+ _outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, UART_FCR+BASE); /* disable fifo */ - inb(UART_LSR+BASE); /* read int flags to clear them for good */ - inb(UART_RX+BASE); /* read int flags to clear them for good */ - inb(UART_IIR+BASE); /* read int flags to clear them for good */ - inb(UART_MSR+BASE); /* read int flags to clear them for good */ - usleep(100000); /* clk = sck = reset = 1 */ -- outb(0, UART_LCR+BASE); usleep(1000); /* clk = 0, sck = 1, reset = 1 */ -- outb(DASA_RESET, UART_MCR+BASE); usleep(1000); /* clk = 0, sck = 0, reset = 1 */ -- outb(0, UART_MCR+BASE); usleep(1000); /* clk = 0, sck = 0, reset = 0 */ -+ _outb(0, UART_LCR+BASE); usleep(1000); /* clk = 0, sck = 1, reset = 1 */ -+ _outb(DASA_RESET, UART_MCR+BASE); usleep(1000); /* clk = 0, sck = 0, reset = 1 */ -+ _outb(0, UART_MCR+BASE); usleep(1000); /* clk = 0, sck = 0, reset = 0 */ - break; - - case PAT_STK200: -- outb(STK2_ENA1 | STK2_ENA2, BASE); /* leave MCU */ -+ _outb(STK2_ENA1 | STK2_ENA2, BASE); /* leave MCU */ - usleep(30000); -- outb(STK2_ENA2, BASE); usleep(1000); /* sck = Z, reset = 0 */ -- outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -- outb(STK2_RESET, BASE); usleep(1000); /* sck = 0, reset = 1 */ -- outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(STK2_ENA2, BASE); usleep(1000); /* sck = Z, reset = 0 */ -+ _outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(STK2_RESET, BASE); usleep(1000); /* sck = 0, reset = 1 */ -+ _outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ - break; - - case PAT_ABB: -- outb(0,BASE+2); usleep(30000); /* leave MCU */ -- outb(0,BASE); /* reset=sck=0 */ -- outb(ABB_EN,BASE+2); usleep(30000); /* enable 244 driver */ -- outb(ABB_RESET,BASE); usleep(30000); /* reset=1 */ -- outb(0,BASE); usleep(30000); /* reset=0*/ -+ _outb(0,BASE+2); usleep(30000); /* leave MCU */ -+ _outb(0,BASE); /* reset=sck=0 */ -+ _outb(ABB_EN,BASE+2); usleep(30000); /* enable 244 driver */ -+ _outb(ABB_RESET,BASE); usleep(30000); /* reset=1 */ -+ _outb(0,BASE); usleep(30000); /* reset=0*/ - // fprintf(stderr, "quiting ... test\n"); exit(1); - break; - - case PAT_AVRISP: -- outb(AVRISP_ENA, BASE); /* leave MCU */ -+ _outb(AVRISP_ENA, BASE); /* leave MCU */ - usleep(30000); -- outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -- outb(AVRISP_RESET, BASE); usleep(1000); /* sck = 0, reset = 1 */ -- outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ -+ _outb(AVRISP_RESET, BASE); usleep(1000); /* sck = 0, reset = 1 */ -+ _outb(0, BASE); usleep(1000); /* sck = 0, reset = 0 */ - break; - - } -@@ -188,7 +209,7 @@ - void TDAPA::JustReset(){ - switch(pa_type){ - case PAT_DAPA: -- outb(DAPA_SCK | DAPA_RESET, BASE+2); /* sck = 0, reset = 1 */ -+ _outb(DAPA_SCK | DAPA_RESET, BASE+2); /* sck = 0, reset = 1 */ - break; - - case PAT_DASA: -@@ -196,16 +217,16 @@ - break; - - case PAT_STK200: -- outb(STK2_ENA2 | STK2_RESET, BASE); /* sck = Z, reset = 1 */ -+ _outb(STK2_ENA2 | STK2_RESET, BASE); /* sck = Z, reset = 1 */ - break; - - case PAT_ABB: -- outb(ABB_EN,BASE+2); /* enable 244 driver */ -- outb(ABB_RESET,BASE); /* reset=1 */ -+ _outb(ABB_EN,BASE+2); /* enable 244 driver */ -+ _outb(ABB_RESET,BASE); /* reset=1 */ - break; - - case PAT_AVRISP: -- outb(AVRISP_ENA | AVRISP_RESET, BASE); /* Leave MCU, reset = 1 */ -+ _outb(AVRISP_ENA | AVRISP_RESET, BASE); /* Leave MCU, reset = 1 */ - break; - } - usleep(20000); -@@ -214,28 +235,28 @@ - void TDAPA::SCKtoRetryEnable(){ - switch(pa_type){ - case PAT_DAPA: -- outb(0, BASE+2); BigDelay(); -- outb(DAPA_SCK, BASE+2); BigDelay(); -+ _outb(0, BASE+2); BigDelay(); -+ _outb(DAPA_SCK, BASE+2); BigDelay(); - break; - - case PAT_DASA: -- outb (DASA_SCK, UART_MCR+BASE); BigDelay (); /* sck = 1 */ -- outb (0, UART_MCR+BASE); BigDelay (); /* sck = 0 */ -+ _outb (DASA_SCK, UART_MCR+BASE); BigDelay (); /* sck = 1 */ -+ _outb (0, UART_MCR+BASE); BigDelay (); /* sck = 0 */ - break; - - case PAT_STK200: -- outb(STK2_SCK, BASE); BigDelay(); /* sck = 1 */ -- outb(0, BASE); BigDelay(); /* sck = 0 */ -+ _outb(STK2_SCK, BASE); BigDelay(); /* sck = 1 */ -+ _outb(0, BASE); BigDelay(); /* sck = 0 */ - break; - - case PAT_ABB: -- outb(ABB_SCK, BASE); BigDelay(); -- outb(0, BASE); BigDelay(); -+ _outb(ABB_SCK, BASE); BigDelay(); -+ _outb(0, BASE); BigDelay(); - break; - - case PAT_AVRISP: -- outb(AVRISP_SCK, BASE); BigDelay(); /* sck = 1 */ -- outb(0, BASE); BigDelay(); /* sck = 0 */ -+ _outb(AVRISP_SCK, BASE); BigDelay(); /* sck = 1 */ -+ _outb(0, BASE); BigDelay(); /* sck = 0 */ - break; - } - } -@@ -246,56 +267,56 @@ - for (i=0, mask = 0x80; i<8; i++, mask >>= 1){ - switch(pa_type){ - case PAT_DAPA: -- outb(b & mask ? DAPA_DOUT : 0, BASE); BigDelay(); -- outb(0, BASE+2); BigDelay (); -+ _outb(b & mask ? DAPA_DOUT : 0, BASE); BigDelay(); -+ _outb(0, BASE+2); BigDelay (); - if (!(inb (BASE+1) & DAPA_DIN)){received |= mask;} -- outb(DAPA_SCK, BASE+2); BigDelay(); -+ _outb(DAPA_SCK, BASE+2); BigDelay(); - break; - - case PAT_DASA: -- outb((b & mask) ? DASA_MOSI : 0, UART_LCR+BASE); /* send data bit, sck = 0 */ -- outb(DASA_SCK, UART_MCR+BASE); /* send data bit, sck = 1 */ -+ _outb((b & mask) ? DASA_MOSI : 0, UART_LCR+BASE); /* send data bit, sck = 0 */ -+ _outb(DASA_SCK, UART_MCR+BASE); /* send data bit, sck = 1 */ - if(longsck > -2) - BigDelay(); - if(i == 0 && longsck > 5) usleep(longsck); /* allow recharging of the capacitor */ - if (inb(UART_MSR+BASE) & DASA_MISO){received |= mask;} /* read data bit */ -- outb(0, UART_MCR+BASE); /* send data bit, sck = 0 */ -- outb(DASA_MOSI, UART_LCR+BASE); /* power it up */ -+ _outb(0, UART_MCR+BASE); /* send data bit, sck = 0 */ -+ _outb(DASA_MOSI, UART_LCR+BASE); /* power it up */ - if(longsck > -1) - BigDelay(); - break; - - case PAT_STK200: -- outb((b & mask) ? STK2_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? STK2_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - if (inb(BASE + 1) & STK2_DIN){received |= mask;} /* read data bit */ - /* send data bit, sck = 1 */ -- outb(STK2_SCK | ((b & mask) ? STK2_DOUT : 0), BASE); -+ _outb(STK2_SCK | ((b & mask) ? STK2_DOUT : 0), BASE); - BigDelay(); -- outb((b & mask) ? STK2_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? STK2_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - break; - - case PAT_ABB: -- outb((b & mask) ? ABB_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? ABB_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - if (!(inb(BASE + 1) & ABB_DIN)){received |= mask;} /* read data bit */ - /* send data bit, sck = 1 */ -- outb(ABB_SCK | ((b & mask) ? ABB_DOUT : 0), BASE); -+ _outb(ABB_SCK | ((b & mask) ? ABB_DOUT : 0), BASE); - BigDelay(); -- outb((b & mask) ? ABB_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? ABB_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - break; - - case PAT_AVRISP: -- outb((b & mask) ? AVRISP_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? AVRISP_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - if (inb(BASE + 1) & AVRISP_DIN){received |= mask;} /* read data bit */ - /* send data bit, sck = 1 */ - -- outb(AVRISP_SCK | ((b & mask) ? AVRISP_DOUT : 0), BASE); -+ _outb(AVRISP_SCK | ((b & mask) ? AVRISP_DOUT : 0), BASE); - BigDelay(); -- outb((b & mask) ? AVRISP_DOUT : 0, BASE); /* send data bit, sck = 0 */ -+ _outb((b & mask) ? AVRISP_DOUT : 0, BASE); /* send data bit, sck = 0 */ - BigDelay(); - break; - } -@@ -397,9 +418,9 @@ - if (pa_type == PAT_AVRISP) { /* Check if dongle is present */ - unsigned char avrisp_present=1; - -- outb(AVRISP_DNG_OUT | AVRISP_ENA, BASE); -+ _outb(AVRISP_DNG_OUT | AVRISP_ENA, BASE); - if (!(inb(BASE+1)&AVRISP_DNG_IN)) avrisp_present=0; -- outb(AVRISP_ENA, BASE); -+ _outb(AVRISP_ENA, BASE); - if (inb(BASE+1)&AVRISP_DNG_IN) avrisp_present=0; - if (!(inb(BASE+1)&AVRISP_DNG_IN1)) avrisp_present=0; - if (!avrisp_present) { -@@ -410,12 +431,12 @@ - - TDAPA::~TDAPA(){ - switch(pa_type){ -- case PAT_DAPA: outb(DAPA_SCK | DAPA_RESET, BASE+2); break; -- case PAT_DASA: outb(DASA_RESET | DASA_SCK, UART_MCR+BASE); -- outb(DASA_MOSI, UART_LCR+BASE); break; -- case PAT_STK200: outb(STK2_ENA1 | STK2_ENA2 | STK2_RESET, BASE); break; -- case PAT_ABB: outb(0, BASE+2); outb(ABB_RESET, BASE); break; -- case PAT_AVRISP: outb(AVRISP_ENA | AVRISP_RESET, BASE); break; -+ case PAT_DAPA: _outb(DAPA_SCK | DAPA_RESET, BASE+2); break; -+ case PAT_DASA: _outb(DASA_RESET | DASA_SCK, UART_MCR+BASE); -+ _outb(DASA_MOSI, UART_LCR+BASE); break; -+ case PAT_STK200: _outb(STK2_ENA1 | STK2_ENA2 | STK2_RESET, BASE); break; -+ case PAT_ABB: _outb(0, BASE+2); _outb(ABB_RESET, BASE); break; -+ case PAT_AVRISP: _outb(AVRISP_ENA | AVRISP_RESET, BASE); break; - } - } + +$FreeBSD$ + +--- src/DAPA.C.orig Thu Jun 13 15:17:24 2002 ++++ src/DAPA.C Thu Nov 21 20:37:08 2002 +@@ -72,6 +72,7 @@ + + #elif defined(__FreeBSD__) && defined(__i386__) + ++#include <sys/types.h> + #include <sys/fcntl.h> + #include <machine/cpufunc.h> + #include <machine/sysarch.h> diff --git a/devel/uisp/files/patch-DAPA.h b/devel/uisp/files/patch-DAPA.h deleted file mode 100644 index c2ecd3a..0000000 --- a/devel/uisp/files/patch-DAPA.h +++ /dev/null @@ -1,13 +0,0 @@ -diff -urN DAPA.h.orig DAPA.h ---- DAPA.h.orig Tue Aug 29 17:08:28 2000 -+++ DAPA.h Fri Feb 16 19:58:33 2001 -@@ -12,7 +12,9 @@ - #include <sys/types.h> - #include <time.h> - #include <unistd.h> -+#if !defined (__FreeBSD__) - #include <string> -+#endif - #include "Error.h" - - class TDAPA { diff --git a/devel/uisp/files/patch-Makefile.in b/devel/uisp/files/patch-Makefile.in new file mode 100644 index 0000000..134af40 --- /dev/null +++ b/devel/uisp/files/patch-Makefile.in @@ -0,0 +1,14 @@ + +$FreeBSD$ + +--- Makefile.in.orig Thu Nov 21 20:34:28 2002 ++++ Makefile.in Thu Nov 21 20:35:07 2002 +@@ -327,7 +327,7 @@ + install-exec-am: + install-exec: install-exec-recursive + +-install-data-am: install-data-local ++install-data-am: # install-data-local + install-data: install-data-recursive + + install-am: all-am diff --git a/devel/uisp/files/patch-Serial.C b/devel/uisp/files/patch-Serial.C deleted file mode 100644 index 4a7a8a9..0000000 --- a/devel/uisp/files/patch-Serial.C +++ /dev/null @@ -1,15 +0,0 @@ -diff -urN Serial.C.orig Serial.C ---- Serial.C.orig Tue Aug 29 17:08:28 2000 -+++ Serial.C Fri Feb 16 19:33:18 2001 -@@ -10,7 +10,11 @@ - #include <stdio.h> - #include <stdlib.h> - #include <unistd.h> -+#if defined (__FreeBSD__) -+#include <termios.h> -+#else - #include <termio.h> -+#endif - #include <fcntl.h> - #include "Global.h" - #include "Serial.h" diff --git a/devel/uisp/files/patch-linux_lp.h b/devel/uisp/files/patch-linux_lp.h deleted file mode 100644 index 566201d..0000000 --- a/devel/uisp/files/patch-linux_lp.h +++ /dev/null @@ -1,192 +0,0 @@ -diff -urN linux_lp.h.orig linux_lp.h ---- linux_lp.h.orig Thu Jan 1 00:00:00 1970 -+++ linux_lp.h Fri Feb 16 19:44:52 2001 -@@ -0,0 +1,188 @@ -+#ifndef _LINUX_LP_H -+#define _LINUX_LP_H -+ -+/* -+ * usr/include/linux/lp.h c.1991-1992 James Wiegand -+ * many modifications copyright (C) 1992 Michael K. Johnson -+ * Interrupt support added 1993 Nigel Gamble -+ */ -+ -+/* -+ * Per POSIX guidelines, this module reserves the LP and lp prefixes -+ * These are the lp_table[minor].flags flags... -+ */ -+#define LP_EXIST 0x0001 -+#define LP_SELEC 0x0002 -+#define LP_BUSY 0x0004 -+#define LP_BUSY_BIT_POS 2 -+#define LP_OFFL 0x0008 -+#define LP_NOPA 0x0010 -+#define LP_ERR 0x0020 -+#define LP_ABORT 0x0040 -+#define LP_CAREFUL 0x0080 /* obsoleted -arca */ -+#define LP_ABORTOPEN 0x0100 -+#define LP_TRUST_IRQ 0x0200 -+ -+/* timeout for each character. This is relative to bus cycles -- it -+ * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you -+ * have extremely slow printing, or if the machine seems to slow down -+ * a lot when you print. If you have slow printing, increase this -+ * number and recompile, and if your system gets bogged down, decrease -+ * this number. This can be changed with the tunelp(8) command as well. -+ */ -+ -+#define LP_INIT_CHAR 1000 -+ -+/* The parallel port specs apparently say that there needs to be -+ * a .5usec wait before and after the strobe. -+ */ -+ -+#define LP_INIT_WAIT 1 -+ -+/* This is the amount of time that the driver waits for the printer to -+ * catch up when the printer's buffer appears to be filled. If you -+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease -+ * this number, and if you have a slow printer, increase this number. -+ * This is in hundredths of a second, the default 2 being .05 second. -+ * Or use the tunelp(8) command, which is especially nice if you want -+ * change back and forth between character and graphics printing, which -+ * are wildly different... -+ */ -+ -+#define LP_INIT_TIME 2 -+ -+/* IOCTL numbers */ -+#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */ -+#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */ -+#define LPABORT 0x0604 /* call with TRUE arg to abort on error, -+ FALSE to retry. Default is retry. */ -+#define LPSETIRQ 0x0605 /* call with new IRQ number, -+ or 0 for polling (no IRQ) */ -+#define LPGETIRQ 0x0606 /* get the current IRQ number */ -+#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */ -+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */ -+#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off- -+ line, and error indicators good on all writes, -+ FALSE to ignore them. Default is ignore. */ -+#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error, -+ FALSE to ignore error. Default is ignore. */ -+#define LPGETSTATUS 0x060b /* return LP_S(minor) */ -+#define LPRESET 0x060c /* reset printer */ -+#ifdef LP_STATS -+#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ -+#endif -+#define LPGETFLAGS 0x060e /* get status flags */ -+#define LPTRUSTIRQ 0x060f /* set/unset the LP_TRUST_IRQ flag */ -+ -+/* timeout for printk'ing a timeout, in jiffies (100ths of a second). -+ This is also used for re-checking error conditions if LP_ABORT is -+ not set. This is the default behavior. */ -+ -+#define LP_TIMEOUT_INTERRUPT (60 * HZ) -+#define LP_TIMEOUT_POLLED (10 * HZ) -+ -+#ifdef __KERNEL__ -+ -+/* Magic numbers for defining port-device mappings */ -+#define LP_PARPORT_UNSPEC -4 -+#define LP_PARPORT_AUTO -3 -+#define LP_PARPORT_OFF -2 -+#define LP_PARPORT_NONE -1 -+ -+#define LP_F(minor) lp_table[(minor)].flags /* flags for busy, etc. */ -+#define LP_CHAR(minor) lp_table[(minor)].chars /* busy timeout */ -+#define LP_TIME(minor) lp_table[(minor)].time /* wait time */ -+#define LP_WAIT(minor) lp_table[(minor)].wait /* strobe wait */ -+#define LP_IRQ(minor) lp_table[(minor)].dev->port->irq /* interrupt # */ -+ /* PARPORT_IRQ_NONE means polled */ -+#ifdef LP_STATS -+#define LP_STAT(minor) lp_table[(minor)].stats /* statistics area */ -+#endif -+#define LP_BUFFER_SIZE 256 -+ -+#define LP_BASE(x) lp_table[(x)].dev->port->base -+ -+#ifdef LP_STATS -+struct lp_stats { -+ unsigned long chars; -+ unsigned long sleeps; -+ unsigned int maxrun; -+ unsigned int maxwait; -+ unsigned int meanwait; -+ unsigned int mdev; -+}; -+#endif -+ -+struct lp_struct { -+ struct pardevice *dev; -+ unsigned long flags; -+ unsigned int chars; -+ unsigned int time; -+ unsigned int wait; -+ char *lp_buffer; -+#ifdef LP_STATS -+ unsigned int lastcall; -+ unsigned int runchars; -+ struct lp_stats stats; -+#endif -+ struct wait_queue *wait_q; -+ unsigned int last_error; -+ volatile unsigned int irq_detected:1; -+ volatile unsigned int irq_missed:1; -+}; -+ -+/* -+ * The following constants describe the various signals of the printer port -+ * hardware. Note that the hardware inverts some signals and that some -+ * signals are active low. An example is LP_STROBE, which must be programmed -+ * with 1 for being active and 0 for being inactive, because the strobe signal -+ * gets inverted, but it is also active low. -+ */ -+ -+/* -+ * bit defines for 8255 status port -+ * base + 1 -+ * accessed with LP_S(minor), which gets the byte... -+ */ -+#define LP_PBUSY 0x80 /* inverted input, active high */ -+#define LP_PACK 0x40 /* unchanged input, active low */ -+#define LP_POUTPA 0x20 /* unchanged input, active high */ -+#define LP_PSELECD 0x10 /* unchanged input, active high */ -+#define LP_PERRORP 0x08 /* unchanged input, active low */ -+ -+/* -+ * defines for 8255 control port -+ * base + 2 -+ * accessed with LP_C(minor) -+ */ -+#define LP_PINTEN 0x10 /* high to read data in or-ed with data out */ -+#define LP_PSELECP 0x08 /* inverted output, active low */ -+#define LP_PINITP 0x04 /* unchanged output, active low */ -+#define LP_PAUTOLF 0x02 /* inverted output, active low */ -+#define LP_PSTROBE 0x01 /* short high output on raising edge */ -+ -+/* -+ * the value written to ports to test existence. PC-style ports will -+ * return the value written. AT-style ports will return 0. so why not -+ * make them the same ? -+ */ -+#define LP_DUMMY 0x00 -+ -+/* -+ * This is the port delay time, in microseconds. -+ * It is used only in the lp_init() and lp_reset() routine. -+ */ -+#define LP_DELAY 50 -+ -+#define LP_POLLED(minor) (lp_table[(minor)].dev->port->irq == PARPORT_IRQ_NONE) -+#define LP_PREEMPTED(minor) (lp_table[(minor)].dev->port->waithead != NULL) -+ -+/* -+ * function prototypes -+ */ -+ -+extern int lp_init(void); -+ -+#endif -+ -+#endif diff --git a/devel/uisp/files/patch-linux_serial_reg.h b/devel/uisp/files/patch-linux_serial_reg.h deleted file mode 100644 index 0fb37bc..0000000 --- a/devel/uisp/files/patch-linux_serial_reg.h +++ /dev/null @@ -1,148 +0,0 @@ -diff -urN linux_serial_reg.h.orig linux_serial_reg.h ---- linux_serial_reg.h.orig Thu Jan 1 00:00:00 1970 -+++ linux_serial_reg.h Fri Feb 16 20:04:51 2001 -@@ -0,0 +1,144 @@ -+/* -+ * include/linux/serial_reg.h -+ * -+ * Copyright (C) 1992, 1994 by Theodore Ts'o. -+ * -+ * Redistribution of this file is permitted under the terms of the GNU -+ * Public License (GPL) -+ * -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ -+ -+#ifndef _LINUX_SERIAL_REG_H -+#define _LINUX_SERIAL_REG_H -+ -+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -+#define UART_IER 1 /* Out: Interrupt Enable Register */ -+#define UART_IIR 2 /* In: Interrupt ID Register */ -+#define UART_FCR 2 /* Out: FIFO Control Register */ -+#define UART_EFR 2 /* I/O: Extended Features Register */ -+ /* (DLAB=1, 16C660 only) */ -+#define UART_LCR 3 /* Out: Line Control Register */ -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_LSR 5 /* In: Line Status Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_SCR 7 /* I/O: Scratch Register */ -+ -+/* -+ * These are the definitions for the FIFO Control Register -+ * (16650 only) -+ */ -+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ -+/* 16650 redefinitions */ -+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ -+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ -+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ -+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ -+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ -+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ -+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ -+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ -+/* TI 16750 definitions */ -+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */ -+ -+/* -+ * These are the definitions for the Line Control Register -+ * -+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting -+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. -+ */ -+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -+#define UART_LCR_SBC 0x40 /* Set break control */ -+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -+#define UART_LCR_EPAR 0x10 /* Even parity select */ -+#define UART_LCR_PARITY 0x08 /* Parity Enable */ -+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ -+ -+/* -+ * These are the definitions for the Line Status Register -+ */ -+#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -+#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -+#define UART_LSR_FE 0x08 /* Frame error indicator */ -+#define UART_LSR_PE 0x04 /* Parity error indicator */ -+#define UART_LSR_OE 0x02 /* Overrun error indicator */ -+#define UART_LSR_DR 0x01 /* Receiver data ready */ -+ -+/* -+ * These are the definitions for the Interrupt Identification Register -+ */ -+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ -+ -+#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ -+ -+/* -+ * These are the definitions for the Interrupt Enable Register -+ */ -+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ -+/* -+ * Sleep mode for ST16650 and TI16750. -+ * Note that for 16650, EFR-bit 4 must be selected as well. -+ */ -+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ -+ -+/* -+ * These are the definitions for the Modem Control Register -+ */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -+#define UART_MCR_OUT2 0x08 /* Out2 complement */ -+#define UART_MCR_OUT1 0x04 /* Out1 complement */ -+#define UART_MCR_RTS 0x02 /* RTS complement */ -+#define UART_MCR_DTR 0x01 /* DTR complement */ -+ -+/* -+ * These are the definitions for the Modem Status Register -+ */ -+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -+#define UART_MSR_RI 0x40 /* Ring Indicator */ -+#define UART_MSR_DSR 0x20 /* Data Set Ready */ -+#define UART_MSR_CTS 0x10 /* Clear to Send */ -+#define UART_MSR_DDCD 0x08 /* Delta DCD */ -+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -+#define UART_MSR_DDSR 0x02 /* Delta DSR */ -+#define UART_MSR_DCTS 0x01 /* Delta CTS */ -+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ -+ -+/* -+ * These are the definitions for the Extended Features Register -+ * (StarTech 16C660 only, when DLAB=1) -+ */ -+#define UART_EFR_CTS 0x80 /* CTS flow control */ -+#define UART_EFR_RTS 0x40 /* RTS flow control */ -+#define UART_EFR_SCD 0x20 /* Special character detect */ -+#define UART_EFR_ECB 0x10 /* Enhanced control bit */ -+/* -+ * the low four bits control software flow control -+ */ -+ -+#endif /* _LINUX_SERIAL_REG_H */ -+ diff --git a/devel/uisp/pkg-comment b/devel/uisp/pkg-comment index bf3debf..47fdbba 100644 --- a/devel/uisp/pkg-comment +++ b/devel/uisp/pkg-comment @@ -1 +1,2 @@ A versatile programmer for atmel AVR microcontrollers +A versatile programmer for atmel AVR microcontrollers diff --git a/devel/uisp/pkg-descr b/devel/uisp/pkg-descr index fbb3e55..0318f8c 100644 --- a/devel/uisp/pkg-descr +++ b/devel/uisp/pkg-descr @@ -3,7 +3,7 @@ through your parallel or serial port. Several programming hardware are supported, the only one I have tested and the simplest one (no component) is the in-circuit parallel programmer. Schematics are available online. -WWW: http://medo.fov.uni-mb.si/mapp/uTools/index.html +WWW: http://savannah.nongnu.org/projects/uisp - Bruno diff --git a/devel/uisp/pkg-plist b/devel/uisp/pkg-plist index 5a650d2..10e9ba1 100644 --- a/devel/uisp/pkg-plist +++ b/devel/uisp/pkg-plist @@ -1 +1,2 @@ +@comment $FreeBSD$ bin/uisp |