Bring it back again.

Port was o.k. to get tacacs up and running using a Cisco router and
I really missed it.

- Added me as maintainer of the port
- Moved sources to my homepage download area
- Compressed sources using bzip2
- Removed some not needed variables in Makefile
- Committed with new nd5 checksum

10 files changed, 512 insertions, 0 deletions

diff --git a/net/tac_plus4/Makefile b/net/tac_plus4/Makefile
new file mode 100644
index 0000000..bc55d03
--- /dev/null
+++ b/net/tac_plus4/Makefile
@@ -0,0 +1,46 @@
+# New ports collection makefile for:	tac_plus
+# Version required:	2.1
+# Date created:		4 Mar 1997
+# Whom:			Igor Vinokurov <igor@zynaps.ru>
+#
+# $FreeBSD$
+#
+
+DISTNAME=	tac_plus.2.1
+PKGNAME=	tac_plus-2.1
+CATEGORIES=	net
+MASTER_SITES=	http://www.FreeBSD.ORG/~andreas/download/
+
+MAINTAINER=     andreas@FreeBSD.org
+
+USE_BZIP2=	yes
+ALL_TARGET=	tac_plus
+MAN8=		tac_plus.8
+EXTRA_PATCH=	patch-ba
+
+# To change the text displayed when users are prompted to enter
+# a username, set appropriately TAC_CHANGE_PROMPT variable.
+.if defined(TAC_CHANGE_PROMPT) && ${TAC_CHANGE_PROMPT} == YES
+pre-patch:
+	@${CP} ${FILESDIR}/${EXTRA_PATCH} ${PATCHDIR}
+.endif
+
+do-install:
+	${INSTALL_PROGRAM} ${WRKSRC}/tac_plus ${PREFIX}/sbin
+	${INSTALL_MAN} ${WRKSRC}/tac_plus.1 ${PREFIX}/man/man8/tac_plus.8
+	${INSTALL_DATA} ${FILESDIR}/tac_plus.conf.example ${PREFIX}/etc/
+	@if [ ! -f ${PREFIX}/etc/rc.d/tac_plus.sh ]; then \
+	${ECHO} "Installing ${PREFIX}/etc/rc.d/tac_plus.sh startup file."; \
+	${ECHO} "#!/bin/sh" > ${PREFIX}/etc/rc.d/tac_plus.sh; \
+	${ECHO} "[ -x ${PREFIX}/sbin/tac_plus -a -f ${PREFIX}/etc/tac_plus.conf ] && ${PREFIX}/sbin/tac_plus -C ${PREFIX}/etc/tac_plus.conf && ${ECHO} -n ' tac_plus'" >> ${PREFIX}/etc/rc.d/tac_plus.sh; \
+	${CHMOD} 751 ${PREFIX}/etc/rc.d/tac_plus.sh; \
+	fi
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${PREFIX}/share/doc/tac_plus
+	${INSTALL_DATA} ${WRKSRC}/users_guide ${PREFIX}/share/doc/tac_plus
+.endif
+
+pre-clean:
+	@${RM} -f ${PATCHDIR}/${EXTRA_PATCH}
+
+.include <bsd.port.mk>
diff --git a/net/tac_plus4/distinfo b/net/tac_plus4/distinfo
new file mode 100644
index 0000000..d760826
--- /dev/null
+++ b/net/tac_plus4/distinfo
@@ -0,0 +1 @@
+MD5 (tac_plus.2.1.tar.bz2) = 32b086d7d5b71eb097c317a38fe5d84b
diff --git a/net/tac_plus4/files/extra-patch-ba b/net/tac_plus4/files/extra-patch-ba
new file mode 100644
index 0000000..9cb5ff3
--- /dev/null
+++ b/net/tac_plus4/files/extra-patch-ba
@@ -0,0 +1,69 @@
+*** authen.c.orig	Sat Jul 29 02:49:15 1995
+--- authen.c	Wed Jul 16 15:00:40 1997
+***************
+*** 209,217 ****
+  
+  	    datap->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (datap->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nUsername: ";
+  	    } else {
+! 		prompt = "Username: ";
+  	    }
+  	    send_authen_reply(TAC_PLUS_AUTHEN_STATUS_GETUSER, /* status */
+  			      prompt, /* msg */
+--- 209,217 ----
+  
+  	    datap->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (datap->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nlogin: ";
+  	    } else {
+! 		prompt = "login: ";
+  	    }
+  	    send_authen_reply(TAC_PLUS_AUTHEN_STATUS_GETUSER, /* status */
+  			      prompt, /* msg */
+*** default_fn.c.orig	Sat Jul 29 02:49:18 1995
+--- default_fn.c	Wed Jul 16 15:00:52 1997
+***************
+*** 76,84 ****
+  	    /* No username. Try requesting one */
+  	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nUsername: ";
+  	    } else {
+! 		prompt = "Username: ";
+  	    }
+  	    data->server_msg = tac_strdup(prompt);
+  	    p->state = STATE_AUTHEN_GETUSER;
+--- 76,84 ----
+  	    /* No username. Try requesting one */
+  	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nlogin: ";
+  	    } else {
+! 		prompt = "login: ";
+  	    }
+  	    data->server_msg = tac_strdup(prompt);
+  	    p->state = STATE_AUTHEN_GETUSER;
+*** skey_fn.c.orig	Wed Jul 16 14:38:34 1997
+--- skey_fn.c	Wed Jul 16 15:01:01 1997
+***************
+*** 104,112 ****
+  	    /* No username. Try requesting one */
+  	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nUsername: ";
+  	    } else {
+! 		prompt = "Username: ";
+  	    }
+  	    data->server_msg = tac_strdup(prompt);
+  	    p->state = STATE_AUTHEN_GETUSER;
+--- 104,112 ----
+  	    /* No username. Try requesting one */
+  	    data->status = TAC_PLUS_AUTHEN_STATUS_GETUSER;
+  	    if (data->service == TAC_PLUS_AUTHEN_SVC_LOGIN) {
+! 		prompt = "\nUser Access Verification\n\nlogin: ";
+  	    } else {
+! 		prompt = "login: ";
+  	    }
+  	    data->server_msg = tac_strdup(prompt);
+  	    p->state = STATE_AUTHEN_GETUSER;
diff --git a/net/tac_plus4/files/patch-aa b/net/tac_plus4/files/patch-aa
new file mode 100644
index 0000000..3171aee
--- /dev/null
+++ b/net/tac_plus4/files/patch-aa
@@ -0,0 +1,43 @@
+--- Makefile.orig	Sat Jul 29 00:49:20 1995
++++ Makefile	Thu Oct 14 22:12:44 1999
+@@ -22,9 +22,9 @@
+ # OSLIBS=-lsocket -lnsl
+ 
+ # For FreeBSD
+-# OS=-DFREEBSD
++OS=-DFREEBSD
+ # You may also need to add
+-# OSLIBS=-lcrypt
++OSLIBS=-lcrypt
+ 
+ # For LINUX
+ # OS=-DLINUX
+@@ -40,23 +40,23 @@
+ # FLAGS   = -DTAC_PLUS_USERID=$(USERID) -DTAC_PLUS_GROUPID=$(GROUPID)
+ 
+ # Definitions for SKEY functionality
+-# DEFINES = -DSKEY
+-# LIBS = ../crimelab/skey/src/libskey.a
++DEFINES = -DSKEY
++LIBS = -lskey -lmd
+ # INCLUDES = -I../crimelab/skey/src
+ 
+-DEBUG = -g
++#DEBUG = -g
+ 
+ # On startup, tac_plus creates the file /etc/tac_plus.pid (if
+ # possible), containing its process id. Uncomment and modify the
+ # following line to change this filename
+ 
+-# PIDFILE = -DTAC_PLUS_PIDFILE=\"/var/run/tac_plus.pid\" 
++PIDFILE = -DTAC_PLUS_PIDFILE=\"/var/run/tac_plus.pid\" 
+ 
+ #
+ # End of customisable section of Makefile
+ #
+ 
+-CFLAGS = $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE)
++CFLAGS += $(DEBUG) $(DEFINES) $(INCLUDES) $(FLAGS) $(OS) $(PIDFILE)
+ 
+ SRCS =	acct.c authen.c author.c choose_authen.c config.c do_acct.c \
+ 	do_author.c dump.c encrypt.c expire.c md5.c \
diff --git a/net/tac_plus4/files/patch-ab b/net/tac_plus4/files/patch-ab
new file mode 100644
index 0000000..e91f6f0
--- /dev/null
+++ b/net/tac_plus4/files/patch-ab
@@ -0,0 +1,28 @@
+*** skey_fn.c.orig	Sat Jul 29 02:49:18 1995
+--- skey_fn.c	Mon Mar  3 17:33:57 1997
+***************
+*** 153,158 ****
+--- 153,163 ----
+  		char buf[256];
+  		sprintf(buf, "%s\nPassword: ", skeyprompt);
+  		data->server_msg = tac_strdup(buf);
++ 
++ 		/* We try to make it in accordance of standard FreeBSD
++ 		 * behaviour in order to avoid surprises for user */
++ 		data->flags = TAC_PLUS_AUTHEN_FLAG_NOECHO;
++ 
+  		data->status = TAC_PLUS_AUTHEN_STATUS_GETPASS;
+  		p->state = STATE_AUTHEN_GETPASS;
+  		return (0);
+*** tac_plus.h.orig	Sat Jul 29 02:49:19 1995
+--- tac_plus.h	Mon Mar  3 17:35:51 1997
+***************
+*** 91,96 ****
+--- 91,97 ----
+  #ifdef FREEBSD
+  #define CONST_SYSERRLIST
+  #define STDLIB_MALLOC
++ #define NO_PWAGE
+  #define VOIDSIG
+  #endif
+  
diff --git a/net/tac_plus4/files/patch-ac b/net/tac_plus4/files/patch-ac
new file mode 100644
index 0000000..bed281b
--- /dev/null
+++ b/net/tac_plus4/files/patch-ac
@@ -0,0 +1,107 @@
+*** tac_plus.1.orig	Sat Jul 29 02:49:20 1995
+--- tac_plus.1	Mon Mar  3 17:34:30 1997
+***************
+*** 30,36 ****
+  authorisation and accounting.
+  .LP
+  On startup, tac_plus creates the file
+! .B /etc/tac_plus.pid ,
+  if possible, containing its process id.
+  .LP
+  .SH ARGUMENTS and OPTIONS
+--- 30,36 ----
+  authorisation and accounting.
+  .LP
+  On startup, tac_plus creates the file
+! .B /var/run/tac_plus.pid ,
+  if possible, containing its process id.
+  .LP
+  .SH ARGUMENTS and OPTIONS
+***************
+*** 79,91 ****
+  .B \-d <level>
+  Switch on debugging and write debug output into
+  .B
+! /tmp/var/tac_plus.log. 
+  
+  See the definitions of debugging flags at the bottom of tac_plus.h for
+  available flags and their meanings.  Most flags cause extra messages
+  to be sent to 
+  .B
+! /tmp/var/tac_plus.log 
+  and also to 
+  .B
+  syslog.
+--- 79,91 ----
+  .B \-d <level>
+  Switch on debugging and write debug output into
+  .B
+! /var/tmp/tac_plus.log. 
+  
+  See the definitions of debugging flags at the bottom of tac_plus.h for
+  available flags and their meanings.  Most flags cause extra messages
+  to be sent to 
+  .B
+! /var/tmp/tac_plus.log 
+  and also to 
+  .B
+  syslog.
+***************
+*** 177,183 ****
+  facility.
+  .nf
+  
+! local6.info					/var/adm/messages
+  
+  .fi
+  .LP
+--- 177,183 ----
+  facility.
+  .nf
+  
+! local6.info					/var/log/tac_plus.log
+  
+  .fi
+  .LP
+***************
+*** 194,200 ****
+  .B /var/tmp/tac_plus.log
+  Contains debugging output when -d is in effect.
+  .TP
+! .B /etc/tac_plus.pid 
+  contains the process id of currently running daemon.
+  .SH BUGS
+  The configuration file syntax is too complex.
+--- 194,200 ----
+  .B /var/tmp/tac_plus.log
+  Contains debugging output when -d is in effect.
+  .TP
+! .B /var/run/tac_plus.pid 
+  contains the process id of currently running daemon.
+  .SH BUGS
+  The configuration file syntax is too complex.
+*** users_guide.orig	Sat Jul 29 02:49:20 1995
+--- users_guide	Mon Mar  3 19:51:56 1997
+***************
+*** 996,1005 ****
+  and then send the daemon a SIGUSR1. This will cause it to reinitialize
+  itself and re-read the configuration file.
+  
+! On startup, tac_plus creates the file /etc/tac_plus.pid , if possible,
+  containing its process id, so something like the following should work:
+  
+! # kill -USR1 `cat /etc/tac_plus.pid`
+  
+  It's a good idea to check that the daemon is still running after
+  sending it a SIGUSR1, since a syntactically incorrect configuration
+--- 996,1005 ----
+  and then send the daemon a SIGUSR1. This will cause it to reinitialize
+  itself and re-read the configuration file.
+  
+! On startup, tac_plus creates the file /var/run/tac_plus.pid, if possible,
+  containing its process id, so something like the following should work:
+  
+! # kill -USR1 `cat /var/run/tac_plus.pid`
+  
+  It's a good idea to check that the daemon is still running after
+  sending it a SIGUSR1, since a syntactically incorrect configuration
diff --git a/net/tac_plus4/files/tac_plus.conf.example b/net/tac_plus4/files/tac_plus.conf.example
new file mode 100644
index 0000000..0d7b273
--- /dev/null
+++ b/net/tac_plus4/files/tac_plus.conf.example
@@ -0,0 +1,76 @@
+# /usr/local/etc/tac_plus.conf
+
+user=fred {
+    name = "Fred Flintstone"
+    login = des mEX027bHtzTlQ
+
+    # Remember that authorization is also recursive over groups, in
+    # the same way that password lookups are recursive. Thus, if you
+    # place a user in a group, the daemon will look in the group for
+    # authorization parameters if it cannot find them in the user
+    # declaration.
+    member = admin
+
+    expires = "May 23 2005"
+ 
+    service = exec {
+        # When Fred starts an exec, his connection access list is 5
+        acl = 5
+ 
+        # We require this autocmd to be done at startup
+        autocmd = "telnet foo"
+    }
+ 
+    # All commands except telnet 131.108.13.* are denied for Fred
+    cmd = telnet {
+        # Fred can run the following telnet command
+        permit 131\.108\.13\.[0-9]+
+
+        deny .*
+    }
+ 
+    service = ppp protocol = ip {
+        # Fred can run ip over ppp only if he uses one 
+        # of the following mandatory addresses If he supplies no
+        # address, the first one here will be mandated
+        addr=131.108.12.11
+        addr=131.108.12.12
+        addr=131.108.12.13
+        addr=131.108.12.14
+ 
+        # Fred's mandatory input access list number is 101
+        inacl=101
+ 
+        # We will suggest an output access list of 102, but Fred may
+        # choose to ignore or override it
+        optional outacl=102
+    }
+
+    service = slip {
+        # Fred can run slip. When he does, he will have to use
+        # these mandatory access lists
+        inacl=101
+        outacl=102
+    }
+ 
+    # set a timeout in the lcp layer of ppp
+    service = ppp protocol = lcp {
+        timeout = 10
+    }
+}
+
+user = wilma {
+    # Wilma has no password of her own, but she's a group member so
+    # she'll use the group password if there is one. Same for her
+    # password expiry date
+    member = admin
+}
+ 
+group = admin {
+    # group members who don't have their own password will be looked
+    # up in /etc/passwd
+    login = file /etc/passwd
+ 
+    # group members who have no expiry date set will use this one
+    expires = "Jan 1 1998"
+}
diff --git a/net/tac_plus4/pkg-comment b/net/tac_plus4/pkg-comment
new file mode 100644
index 0000000..0913e34
--- /dev/null
+++ b/net/tac_plus4/pkg-comment
@@ -0,0 +1 @@
+A remote authentication/authorization/accounting server
diff --git a/net/tac_plus4/pkg-descr b/net/tac_plus4/pkg-descr
new file mode 100644
index 0000000..d49d4bd
--- /dev/null
+++ b/net/tac_plus4/pkg-descr
@@ -0,0 +1,136 @@
+<html>
+<head><title>CVS log for ports/net/tac_plus/pkg/Attic/DESCR</title>
+<meta name="robots" content="nofollow">
+</head>
+<body text="#000000" bgcolor="#ffffff">
+<IMG SRC="/gifs/bar.gif" ALT="Navigation Bar" WIDTH="565" HEIGHT="33" BORDER=0 usemap="#bar">
+<map name="bar">
+<area shape="rect" coords="1,1,111,31" href="/index.html" ALT="Top">
+<area shape="rect" coords="112,11,196,31" href="/ports/index.html" ALT="Applications">
+<area shape="rect" coords="196,12,257,33" href="/support.html" ALT="Support">
+<area shape="rect" coords="256,12,365,33" href="/docs.html" ALT="Documentation"> 
+<area shape="rect" coords="366,13,424,32" href="/commercial/commercial.html" ALT="Vendors">
+<area shape="rect" coords="425,16,475,32" href="/search/search.html" ALT="Search">
+<area shape="rect" coords="477,16,516,33" href="/search/index-site.html" ALT="Index">
+<area shape="rect" coords="516,15,562,33" href="/index.html" ALT="Top">
+<area shape="rect" href="/index.html" coords="0,0,564,32" ALT="Top">
+</map> <h1><font color="#660000">CVS log for ports/net/tac_plus/pkg/Attic/DESCR</font></h1>
+Up to <A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/">ports/net/tac_plus/pkg/</A>
+<BR>
+<A HREF="#diff">Request diff between arbitrary revisions</A>
+<HR NOSHADE>
+No default branch<BR><HR NOSHADE>
+<a NAME="rev1.4"></a><a NAME="HEAD"></a>
+<A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR?rev=1.4"><b>1.4</b></A> <i>Tue Sep  7  6:58:57 1999
+ UTC</i> by <i>fenner</i>
+<BR>CVS Tags: <b>HEAD</b><BR><A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR.diff?r1=1.3&r2=1.4">Diffs to 1.3</A>
+<BR><B><I>FILE REMOVED</I></B>
+<PRE>
+Delete port: tac_plus
+
+PR:		<A HREF=http://www.freebsd.org/cgi/query-pr.cgi?pr=13301>ports/13301</A>
+Submitted by:	Igor Vinokurov &lt;igor@rtsnet.ru&gt;
+</PRE><HR NOSHADE>
+<a NAME="rev1.3"></a><a NAME="RELEASE_3_2_0"></a>
+<A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR?rev=1.3"><b>1.3</b></A> <i>Mon May  3  5:26:43 1999
+ UTC</i> by <i>mharo</i>
+<BR>CVS Tags: <b>RELEASE_3_2_0</b><BR><A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR.diff?r1=1.2&r2=1.3">Diffs to 1.2</A>
+<PRE>
+WWW:  This is definately the daemon's work.  In Chuck we trust.
+</PRE><HR NOSHADE>
+<a NAME="rev1.2"></a><a NAME="RELEASE_3_1_0"></a><a NAME="RELEASE_2_2_8"></a><a NAME="RELEASE_3_0_0"></a><a NAME="RELEASE_2_2_7"></a><a NAME="RELEASE_2_2_6"></a><a NAME="RELEASE_2_2_5"></a>
+<A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR?rev=1.2"><b>1.2</b></A> <i>Wed Sep 17  4:51:44 1997
+ UTC</i> by <i>max</i>
+<BR>CVS Tags: <b>RELEASE_3_1_0, RELEASE_2_2_8, RELEASE_3_0_0, RELEASE_2_2_7, RELEASE_2_2_6, RELEASE_2_2_5</b><BR><A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR.diff?r1=1.1&r2=1.2">Diffs to 1.1</A>
+<PRE>
+- Fix problem with configuration file name in the startup script.
+- Add an optional patch to change the prompt.  (Execute make with
+  TAC_CHANGE_PROMPT=YES to activate.)
+<A HREF=http://www.freebsd.org/cgi/query-pr.cgi?pr=4105>PR:		4105</A>
+Submitted by:	the port maintainer
+</PRE><HR NOSHADE>
+<a NAME="rev1.1.1.1"></a><a NAME="TAC_PLUS_2_1"></a><a NAME="vinokurov"></a>
+<A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR?rev=1.1.1.1"><b>1.1.1.1</b></A> <i>(vendor branch)</i> <i>Mon Jun 23 15:39:59 1997
+ UTC</i> by <i>max</i>
+<BR>CVS Tags: <b>TAC_PLUS_2_1</b>; Branch: <b>vinokurov</b>
+<BR><A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR.diff?r1=1.1&r2=1.1.1.1">Diffs to 1.1</A>
+<PRE>
+New port, tac_plus:
+tac_plus provides Cisco systems routers and access servers
+with authentication, authorisation and accounting services.
+
+A configuration file controls the details of authentication,
+authorisation and accounting.
+
+<A HREF=http://www.freebsd.org/cgi/query-pr.cgi?pr=2869>PR:		2869</A>
+Submitted by:	Igor Vinokurov&lt;igor@zynaps.ru&gt;
+Note: Although there is no terms and conditions on redistribution found,
+the author says there is no restriction.  (This is stated in more
+recent alpha version.)  The only concern is the U.S. Export restriction,
+but Cisco has been granted with the right to export their software,
+according to the author.  And also I haven't been able to find any
+implementation that may violate the export control in the source code,
+either.  So, I import this without any RESTRICTED or NO_CDROM defined.
+</PRE><HR NOSHADE>
+<a NAME="rev1.1"></a>
+<A HREF="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR?rev=1.1"><b>1.1</b></A> <i>Mon Jun 23 15:39:59 1997
+ UTC</i> by <i>max</i>
+<PRE>
+Initial revision
+</PRE><HR NOSHADE>
+<A NAME=diff>
+This form allows you to request diff's between any two
+revisions of a file.  You may select a symbolic revision
+name using the selection box or you may type in a numeric
+name using the type-in text box.
+</A><P>
+<FORM METHOD="GET" ACTION="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR.diff">
+Diffs between 
+<SELECT NAME="r1">
+<OPTION VALUE="text" SELECTED>Use Text Field
+<OPTION VALUE="1.4:HEAD">HEAD
+<OPTION VALUE="1.2:RELEASE_2_2_5">RELEASE_2_2_5
+<OPTION VALUE="1.2:RELEASE_2_2_6">RELEASE_2_2_6
+<OPTION VALUE="1.2:RELEASE_2_2_7">RELEASE_2_2_7
+<OPTION VALUE="1.2:RELEASE_2_2_8">RELEASE_2_2_8
+<OPTION VALUE="1.2:RELEASE_3_0_0">RELEASE_3_0_0
+<OPTION VALUE="1.2:RELEASE_3_1_0">RELEASE_3_1_0
+<OPTION VALUE="1.3:RELEASE_3_2_0">RELEASE_3_2_0
+<OPTION VALUE="1.1.1.1:TAC_PLUS_2_1">TAC_PLUS_2_1
+<OPTION VALUE="1.1.1:vinokurov">vinokurov
+</SELECT>
+<INPUT TYPE="TEXT" NAME="tr1" VALUE="1.1">
+ and 
+<SELECT NAME="r2">
+<OPTION VALUE="text" SELECTED>Use Text Field
+<OPTION VALUE="1.4:HEAD">HEAD
+<OPTION VALUE="1.2:RELEASE_2_2_5">RELEASE_2_2_5
+<OPTION VALUE="1.2:RELEASE_2_2_6">RELEASE_2_2_6
+<OPTION VALUE="1.2:RELEASE_2_2_7">RELEASE_2_2_7
+<OPTION VALUE="1.2:RELEASE_2_2_8">RELEASE_2_2_8
+<OPTION VALUE="1.2:RELEASE_3_0_0">RELEASE_3_0_0
+<OPTION VALUE="1.2:RELEASE_3_1_0">RELEASE_3_1_0
+<OPTION VALUE="1.3:RELEASE_3_2_0">RELEASE_3_2_0
+<OPTION VALUE="1.1.1.1:TAC_PLUS_2_1">TAC_PLUS_2_1
+<OPTION VALUE="1.1.1:vinokurov">vinokurov
+</SELECT>
+<INPUT TYPE="TEXT" NAME="tr2" VALUE="1.4">
+<BR><INPUT TYPE=RADIO NAME="f" VALUE=u CHECKED>Unidiff<br>
+<INPUT TYPE=RADIO NAME="f" VALUE=c>Context diff<br>
+<INPUT TYPE=RADIO NAME="f" VALUE=s>Side-by-Side<br>
+<INPUT TYPE=SUBMIT VALUE="Get Diffs">
+</FORM>
+<HR noshade>
+<A name=branch>
+You may select to see revision information from only
+a single branch.
+</A><P>
+<FORM METHOD="GET" ACTION="/cgi/cvsweb.cgi/ports/net/tac_plus/pkg/Attic/DESCR">
+Branch: 
+<SELECT NAME="only_on_branch">
+<OPTION VALUE="" SELECTED>Show all branches
+</SELECT>
+<INPUT TYPE=SUBMIT VALUE="View Branch">
+</FORM>
+<hr><address><a href="/mailto.html">www@freebsd.org</a><br></address>
+</BODY></HTML>
diff --git a/net/tac_plus4/pkg-plist b/net/tac_plus4/pkg-plist
new file mode 100644
index 0000000..8bc819e
--- /dev/null
+++ b/net/tac_plus4/pkg-plist
@@ -0,0 +1,5 @@
+sbin/tac_plus
+etc/rc.d/tac_plus.sh
+etc/tac_plus.conf.example
+share/doc/tac_plus/users_guide
+@dirrm share/doc/tac_plus